COP Week 4 Training

CADET PHYSICAL FITNESS TEST
This meeting you will learn about the Cadet Physical Fitness Test components and begin practicing them on your own for your first test in a month.

The Cadet Physical Fitness Test, or CPFT as you will often hear it referred to, is a test of your general fitness tied to each promotion.  This test covers four events: the Back-Saver Sit and Reach, Curl Ups, Push Ups, and a Run option.  For the run option there is a timed Mile Run or the PACER.  For Phase 1 (C/AB through C/SrA) you take the test as a baseline to see how you are improving. In order to accomodate cadets who might not be active before joining, you do not have to receive a passing score until Phase 2, but you must show progress towards improvement.  In Phase 2 and beyond (C/SSgt through C/Lt Col), you must pass one of the run options and two out of three of the non-running events.  Every event must be attempted each time you test unless you are injured or placed on a Physical Fitness Restriction. A passing score is valid for each promotion in a six month window from the date the PT test was passed.  Cadets testing for the Spaatz Award (C/Col) must pass the U.S. Air Force Academy Candidate Fitness Assesment.  The passing requirements can be found in the Draft CAPP 52-18 Cadet Physical Fitness Program.  You will typically have one chance every quarter (March, June, August, December) to pass the CPFT (weather permitting), however the Mile Run will only be offered when the weather conditions allow.  Below we will provide a description of each event.


Back-Saver Sit and Reach
The back-saver sit and reach is performed on one side at a time. By testing one leg at a time a determination can be made of any asymmetry in hamstring flexibility, and hyperextension of both knees is avoided. The sit and reach measures predominantly the flexibility of the hamstring muscles. Normal hamstring flexibility allows rotation of the pelvis in forward bending movements and posterior tilting of the pelvis for proper sitting.  The test objective is to be able to reach the specified distance on the right and left sides of the body. The distance required is adjusted for age and gender.  The cadet removes his or her shoes and sits down at the test apparatus. One leg is fully extended with the foot flat against the face of the box. The other knee is bent with the sole of the foot flat on the floor. The instep is placed in line with, and 2 to 3 inches to the side of, the straight knee. The arms are extended forward over the measuring scale with the hands placed one on top of the other. With palms down, the student reaches directly forward (keeping back straight and the head up) with both hands along the scale four times and holds the position of the fourth reach for at least 1 second. After one side has been measured, the student switches the position of the legs and reaches again. The student may allow the bent knee to move to the side as the body moves forward if necessary, but the sole of the foot must remain on the floor.  Record the number of inches on each side to the nearest 1/2 inch reached, to a maximum score of 12 inches. Performance is limited to discourage hypermobility. To pass, the cadet should meet the standard on both the right and the left sides.  Here is a video tutorial for the Back-Saver Sit and Reach.

Curl Ups
The curl-up with knees flexed and feet unanchored has been selected because individually these elements have been shown to a) decrease movement of the fifth lumbar vertebra over the sacral vertebrae, b) minimize the activation of the hip flexors, c) increase the activation of the external and internal obliques and transverse abdominals, and d) maximize abdominal muscle activation of the lower and upper rectus abdominals relative to disc compression (load) when compared with a variety of sit-ups.  The objective is to complete as many curl-ups as possible up to a maximum of 75 at a specified pace.  Partner A lies in a supine position on the mat, knees bent at an angle of approximately 140°, feet flat on the floor, legs slightly apart, arms straight and parallel to the trunk with palms of hands resting on the mat. The fingers are stretched out and the head is in contact with the mat. Make sure cadets have extended their feet as far as possible from the buttocks while still allowing feet to remain flat on floor. The closer the feet are positioned in relation to the buttocks, the more difficult the movement. After partner A has assumed the correct position on the mat, partner B places a measuring strip on the mat under partner A’s legs so that partner A’s fingertips are just resting on the nearest edge of the measuring strip. Partner B then kneels down at partner A’s head in a position to count curlups and watch for form breaks. Partner B places a piece of paper under partner A’s head. The paper will assist partner B in judging if partner A’s head touches down on each repetition. The observer should watch for the paper to crinkle each time partner A touches it with his or her head. Before beginning the curl-up, it is a good practice for partner B to pull on partner A’s hands to ensure that the shoulders are relaxed and in a normal resting position. If partner A is allowed to hunch the shoulders before beginning the test, he or she may be able to get the fingertips t o the other side of the testing strip by merely moving the arms and shoulders up and down. Keeping heels in contact with the mat, partner A curls up slowly, sliding fingers across the measuring strip until fingertips reach the other side; then partner A curls back down until his or her head touches the piece of paper on the mat. Movement should be slow and gauged to the specified cadence of 1 curl every 3 seconds.  Partner A continues with-out pausing until he or she can no longer continue or has completed 75 curl-ups. Cadets are stopped after completing 75 curl-ups, when the second form correction is made, or when they can no longer continue. Heels must remain in contact with the mat.  Head must return to the mat on each repetition. Pauses and rest periods are not allowed. The movement should be continuous and with the cadence.  Fingertips must touch the far side of the measuring strip. The score is the number of curl-ups performed. Curl-ups should be counted when the student’s head returns to the mat. For ease in administration, it is permissible to count the first incorrect curl-up.  Here is a video tutorial for the Curl Ups.

Push Ups
The 90° push-up to an elbow angle of 90° tests for upper body strength and endurance.  The objective is to complete as many 90° push-ups as possible at a rhythmic pace.  The cadets are paired; one will perform the test while the other counts 90° push-ups and watches to see that the cadet being tested bends the elbow to 90° with the upper arm parallel to the floor. The cadet being tested assumes a prone position on the mat with hands placed under or slightly wider than the shoulders, fingers stretched out, legs straight and slightly apart, and toes tucked under. The cadet pushes up off the mat with the arms until arms are straight, keeping the legs and back straight. The back should be kept in a straight line from head to toes throughout the test. The cadet then lowers the body using the arms until the elbows bend at a 90° angle and the upper arms are parallel to the floor. This movement is repeated as many times as possible. The cadet should push up and continue the movement until the arms are straight on each repetition. The rhythm is 1 90° push-up every 3 seconds.  Cadets are stopped when the second form correction (mistake) is made. Only one form correction is allowed. Form Corrections include stopping to rest or not maintaining a rhythmic pace, not achieving a 90° angle with the elbow on each repetition, not maintaining correct body position with a straight back, or not extending arms fully.  The score is the number of 90° push-ups performed. For ease in administration, it is permissible to count the first incorrect 90° push-up.  Here is a video tutorial for the Push Ups.

Run Options
Mile Run
This test event measures cardiovascular endurance.  The test is normally conducted on a rubberized track surface.  At our squadron it will either be on a fifth mile track (5 laps) or half mile track (2 laps).  You will ready yourself behind the designated starting line with faster cadets positioned in the front of the pack.  At the command, “Ready, GO!,” you start running and timing begins.  You may run, jog, or walk during this event.  It is important to keep moving in order to get your best score possible.  Be sure to stay on the track at all times to avoid twisting an ankle.  Each time you cross your designated finish line, call out your last name.  When you are approaching your last pass over the finish line, listen for your time and ensure it was recorded next to your name.  Here is a video tutorial for the Mile Run.

PACER
This test event, which is an alternative to the Mile Run, stands for Progressive Aerobic Cardiovascular Endurance Run. The PACER is a multistage fitness test which is progressive in intensity—it is easy at the beginning and gets more difficult at the end.  The progressive nature of the test provides a built-in warm-up and helps cadets to pace themselves. The objective is to run as long as possible with continuous movement back and forth across a 20-meter space at a specified pace that gets faster each minute.  Each cadet being tested should run across the 20-meter distance and touch the line with a foot by the time the beep sounds. The cadet should take full weight on the foot that is touching the line. At the sound of the beep, the cadet turns around and runs back to the other end. If some cadets get to the line before the beep, they must wait for the beep before running the other direction. Cadets continue in this manner until they fail to reach the line before the beep for the second time.  A single beep will sound at the end of the time for each lap. A triple beep sounds at the end of each minute. The triple beep serves the same function as the single beep and also alerts the runners that the pace will get faster. Inform students that when the triple beep sounds, they should not stop but should continue the test by turning and running toward the other end of the area.  The first time a cadet does not reach the line by the time of the beep, the cadet stops where he or she is and reverses direction immediately, attempting to get back on pace. The test is completed for a cadet the next time (second time) he or she fails to reach the line by the time of the beep (the two misses do not have to be consecutive; the test is over after two total misses). Students just completing the test should continue to walk and stretch in the designated cool-down area. For scoring in the PACER test, a lap is one 20-meter distance (from one end to the other). The scorer records the lap number (crossing off each lap number) on a PACER score sheet. The recorded score is the total number of laps completed by the cadet.  Here is a video tutorial for the PACER.

For more information on the CPFT and ways to best prepare for it, visit the Active Cadet Fitness page on the National Headquarters website.


DRILL AND CEREMONIES 4
The following commands are typically covered in Week Four.  These may differ depending upon the speed in which the class learns the information.  All of the images are from AFMAN 36-2203 Air Force Drill and Ceremonies.


Eyes Right (Left)

The command is Eyes, RIGHT (LEFT). This command may be given at a halt or while marching. The preparatory command and command of execution are given on the right (left) foot while marching. On the command RIGHT (LEFT), all persons, except those on the right (left) flank, turn their heads and eyes smartly 45 degrees to the right (left).

Eyes Right



Ready Front

The command is Ready, FRONT. This command may be given at a halt or while marching. To return their heads and eyes to the front, the command Ready, FRONT is given as the left (right) foot strikes the ground. On the command FRONT, heads and eyes are turned smartly to the front.

Ready Front



Dress Right, Dress (at Normal Interval)

The commands are Dress Right, DRESS and Ready, FRONT. On the command DRESS, everyone except the last airman in each element raises and extends the left arm laterally from the shoulder with snap so the arm is parallel with the ground. As the arm is raised, uncup the hand at approximately waist level, keeping the palm down. Extend and join the fingers and place the thumb along the forefinger. At the same time

as the left arm is raised, each individual (except the guide and second, third, and fourth element leaders) turns head and eyes 45 degrees to the right with snap. The leading individual of each file establishes normal interval (by taking small choppy steps and aligning with the base file) and establishes exact shoulder-to-fingertip contact with the individual to the immediate right. The second, third, and fourth element leaders align themselves directly behind the person in front of them (using small choppy steps) and visually establish a 40-inch distance. As the remaining members align themselves behind the individual in front of or to the right of them, their shoulders may or may not touch the fingertips of the individual to their right. If the arm is too long, place the extended hand behind the shoulder of the individual to the left. If the arm is too short,

leave it extended toward the individual to the left and parallel to the ground.


Once dress, cover, interval, and distance have been established, the command Ready, FRONT will be given. On this command, airmen whose arms are up will lower their arms with snap to their sides (without slapping their sides) and recup their hands when their arm is at approximately waist level. As the arm is lowered, airmen whose heads are turned will return their heads to the front with snap. The body is now back to the position of attention.

Dress Right Dress


Open Ranks
The command is Open Ranks, MARCH. It is only given to a formation when in line at normal interval. On the command MARCH, the fourth rank stands fast and automatically executes dress right dress at normal interval. Each succeeding rank in front of the fourth
rank takes the required numbered of paces, stepping off with the left foot and a coordinated arm swing, halts, and automatically executes dress right dress. The third rank takes one pace forward, the second rank takes two paces forward, and the first rank takes three paces forward. Once halted, the distance between ranks will be 64 inches.

The flight commander proceeds and aligns the flight. Once the flight is aligned, the flight commander commands Ready, FRONT. If the flight is to be inspected, the flight commander takes one step forward and faces to the right in a position in front of the guide.

The flight commander salutes and reports to the inspector Sir (Ma’am), Flight _______ is prepared for inspection. As soon as the flight commander has been inspected, he or she is asked to accompany the inspector. The flight commander then executes a left face (down line) and commands Second, Third, and Fourth Elements, Parade, REST.  The flight commander executes a half left in marching without arm swing and halts one pace to the right and one pace to the rear of the inspector (This causes the flight commander to precede the inspector). This position is maintained throughout the inspection of the front of each respective rank. When moving from individual to individual during the inspection, the inspector and flight commander simultaneously execute a face to the right in marching and an in place halt.  The movement is executed by pivoting 90 degrees to the right on the ball of the right foot, simultaneously stepping over the right foot with the left foot and placing the left foot parallel to the rank being inspected. Then advance one short step with the right foot, and place the right foot pointed toward the flight. Next bring the left heel into the right heel, and once again reassume the position of attention. The upper portion of the body remains at the position of attention, and the arm swing is suspended throughout when inspecting the front of each rank. These movements should place the inspector directly in front of the next individual to be inspected, still preceded by the flight commander. After the inspector has inspected the last individual in the front rank, the flight commander hesitates momentarily and allows the inspector to precede him or her as the inspector inspects the front rank from the rear. Normally, during the inspection of the rear of each rank, the flight commander follows the inspector approximately two paces to the rear, halting when the inspector halts. After inspecting the rear of each rank, the flight commander halts in front of the second person of each rank and faces to the right at the same time as the inspector halts in front of the first person. (These procedures are used to inspect the front and rear of subsequent ranks.)

After inspecting the entire flight, the inspector marches off to the right flank (element leaders) of the flight. The flight commander proceeds directly to a position three paces beyond the front rank, halts, faces to the left (down line), and commands Flight, ATTENTION. The flight commander then takes one step forward with arm swing and faces to the right. The inspector marches to a position directly in front of the flight commander and gives comments. After receiving comments, the flight commander salutes the inspector upon departure. The inspector executes the appropriate facing movement to depart. Before giving further commands, the flight commander faces left (down line) and commands Close Ranks, MARCH, gives parade rest, at ease, or rest (whichever is appropriate), and posts in front of and centered on the flight.

If inspection results are recorded, the following procedures apply. While the flight commander is inspected, the recorder; that is, first sergeant or flight sergeant, takes one step to the rear, faces to the right, and marches to a position one pace to the right and one pace to the front of the guide. He or she then faces down line and prepares to record the inspection results. The recorder follows the inspector, who is always moving forward, in the front and rear of each rank. (The flight commander follows the recorder during the inspection of the rear of each rank.) Once the inspector inspects from the rear the last individual in each rank, normally the guide or element leader, the inspector turns and halts directly in front of the element leader of the next rank. The recorder marches past the inspector and reassumes the position of following the inspector. After the last element has been inspected, the inspector inspects the recorder and commands POST. The recorder posts. The flight commander marches three paces beyond the front rank, halts, faces to the left (down line), commands Flight, ATTENTION, takes one step forward with arm swing, faces to the right, receives comments from the inspector, and salutes upon departure. Before giving further commands, the flight commander faces left and commands Close Ranks, MARCH. He or she then gives parade rest, at ease, or rest; whichever is appropriate, and posts in front of and centered on the flight.

When the inspection party finishes inspecting the first element and before the inspector halts in front of the first person of the second element, the second element leader assumes the position of attention. The element leader turns his or her head approximately 45 degrees down line and commands Second Element, ATTENTION. When the first element leader can see the inspector out of the corner of his or her eye, the element leader turns his or her head down line and commands First Element, Parade, REST. This procedure is repeated throughout the remaining elements.


Close Ranks
To close ranks when at open ranks, the command is Close Ranks, MARCH. On the command MARCH, the first rank stands fast. The second rank takes one pace forward with coordinated arm swing and halts at the position of attention. The third and fourth ranks take two and three paces forward, respectively, and halt at attention.


Column of Files

To form a single file when in a column of two or more elements, the command is Column of Files From the Right (Left), Forward, MARCH. If the movement is from the left, the guide takes a position in front of the file that will move first upon hearing the informational command, and remains at carry guidon. On the preparatory command, the element leader of the right (left) element turns his or her head 45 degrees to the right (left) and commands Forward. At the same time, the remaining element leaders turn their heads 45 degrees to the right (left) and command STAND FAST. Their heads are kept to the right (left) until they step off. On the command MARCH, the extreme right (left) element steps off. The element leader of each remaining element commands Forward, MARCH as the last airman in each element passes, ensuring the leaders element is in step with the preceding element. All elements then incline to the right (left), following the leading elements in successive order


In conjunction with forming single files, column movements may be executed at the same time. The command is Column of Files From the Right (Left), Column Right (Left). On the informational command, the guide executing a face in marching takes a position in front of the file that will move first. On the preparatory command, the element leader of the right (left) element commands Column Right (Left). The remaining element leaders command STAND FAST. On the command MARCH, the element leader and guide execute a face in marching to the right (left), and the element leader continues marching in the new direction with 24-inch steps. The guide marches to a position ahead of the element leader, then pivots 45 degrees to a position 40 inches in front of the element leader. The remaining individuals in the base file march forward on the command of execution, pivot in approximately the same location as their element leader, and maintain a 40-inch distance. The element leaders of the remaining elements command Column Right (Left), MARCH, at which time all Airmen perform the movement in the same manner as the base element. The element leaders follow the leading elements in successive order. All members of the formation continue taking 12” steps until receiving the command Forward MARCH.

Column of Files


Incline

To execute a slight change of direction, the command INCLINE TO THE RIGHT (LEFT) is given. The guide or guiding element moves in the indicated direction, and the rest of the element follows. There is no pivot in this movement.



Drill Testing

For each promotion in Phase 1 and 2, you must complete a Drill Test as part of your requirements.  As you progress through the program, you will learn additional drill movements that you will need to test off on for your subsequent promotions.  During Week 9, you will take your Drill Test for your promotion to Cadet Airman - the General John Curry Achievement.  In order to pass, you must perform at least 11 of the following commands correctly.
  • FALL IN
  • Parade, REST
  • Flight, ATTENTION
  • Present, ARMS
  • Order, ARMS
  • About, FACE
  • Dress Right, DRESS
  • Ready, FRONT
  • Right, FACE
  • Left, FACE
  • At Ease
  • Flight, ATTENTION
  • Hand, SALUTE
  • Eyes, RIGHT
  • Ready, FRONT
  • FALL OUT
A copy of the Cadet Drill & Ceremonies Test Book can be found here for your reference.  As a fun fact, that is our squadron on the front cover of the book!  That picture was of our 2009 Drill Team marching between venues in front of the Wright Patterson AFB Operations Building at the 2009 Great Lakes Region Cadet Competition.